CHINAPLAS 2026, one of the most influential international exhibitions for the plastics and rubber industry, brought together global manufacturers, material suppliers, equipment brands and professional buyers at the National Exhibition and Convention Center in Shanghai.
At this major industry event, Wensui Group presented a new generation of plastic auxiliary equipment and integrated processing solutions. With a strong focus on material handling, recycling, drying, temperature control and production efficiency, Wensui demonstrated how modern auxiliary equipment can help plastic manufacturers improve stability, reduce energy consumption and support more sustainable production.
As a long-established brand in the plastic auxiliary equipment industry, Wensui has continued to serve customers in injection molding, extrusion, packaging, automotive parts, electronics, medical products, engineering plastics and recycling applications. At CHINAPLAS 2026, the company highlighted not only individual machines, but also complete production support systems designed for real factory conditions.
Plastic auxiliary equipment plays a critical role in the overall performance of a molding or extrusion plant. While the main processing machine often receives the most attention, the quality of drying, conveying, crushing, mixing, cooling and mold temperature control directly affects production efficiency, product consistency and operating cost.
At the exhibition, Wensui showcased solutions covering several key stages of plastic processing, including:
These systems are designed to support manufacturers that need more stable production, cleaner material handling, better energy management and improved reuse of valuable plastic materials.
One of the key highlights at the Wensui booth was the GZ30HP PEEK special crusher.
PEEK is a high-performance engineering plastic widely used in demanding industries because of its strength, heat resistance and high material value. However, its toughness and mechanical properties also make recycling and crushing more challenging than standard commodity plastics.
To address this application, the GZ30HP is designed with a heavy-duty reducer direct-drive system, low-speed and high-torque operation, and a special cutter structure. The machine can process large PEEK sprues and material blocks up to approximately 30 cm × 30 cm × 40 mm and crush them into uniform particles without requiring a separate shredding step.
With a processing capacity of about 80–150 kg/h, the GZ30HP helps improve the recovery efficiency of high-value engineering plastic waste. For manufacturers working with PEEK and other demanding materials, this type of dedicated crushing equipment can reduce material loss and support more efficient recycling inside the plant.
Wensui also introduced the CL8120 crusher, a machine designed for secondary crushing applications.
In plastic recycling, particle size and output consistency have a direct influence on downstream processing, especially when materials are prepared for re-pelletizing. The CL8120 is suitable for clean plastic materials that require smaller and more uniform crushed particles.
For certain materials, the crushed output can be used directly for further granulation, helping manufacturers shorten the recycling process and improve material reuse efficiency. This makes the CL8120 a practical solution for companies involved in injection molding waste recovery, packaging material recycling, extrusion scrap handling and reprocessing of clean plastic production waste.
Moisture control is one of the most important steps in plastic processing, especially for engineering plastics and moisture-sensitive materials. Poor drying can lead to surface defects, bubbles, silver streaks, dimensional instability and reduced mechanical performance.
At CHINAPLAS 2026, Wensui presented the WEMD120 energy-saving dehumidifying dryer, a system designed to provide stable drying performance while helping reduce operating costs.
Compared with conventional rotary wheel dehumidifying systems, the WEMD120 does not require a separate regeneration circulation system. Its dual-tower dehumidifying structure helps prevent air interference between the regeneration zone and the adsorption zone, improving drying stability.
The machine also adopts a hot-air circulation design and does not require a cooling water system for the adsorption zone. This makes it easier to use in different factory environments while reducing the need for additional utility support.
For plastic manufacturers looking to improve drying performance and reduce long-term energy consumption, the WEMD120 offers a practical solution for daily production.
In addition to its newly launched equipment, Wensui also displayed several mature and widely used products, including the WSIA05 water-cooled chiller and the WSTW06-95 water-type mold temperature controller.
The WSIA05 water-cooled chiller is used to provide stable cooling for plastic processing equipment and molds. Reliable cooling helps maintain production consistency, shorten cycle times and protect equipment from overheating.
The WSTW06-95 water-type mold temperature controller is designed to regulate mold temperature during the molding process. Stable mold temperature control can help improve surface quality, dimensional accuracy and overall molding repeatability.
Together with crushing, drying, conveying and dosing systems, these temperature control and cooling products form an important part of Wensui’s complete auxiliary equipment portfolio.
During the exhibition, the Wensui booth attracted professional visitors from China and overseas markets. Customers from automotive, packaging, electronics, medical products, recycling and engineering plastics applications discussed equipment selection, energy-saving performance, factory layout, maintenance requirements and system integration with the Wensui team.
Instead of only presenting machine specifications, Wensui focused on practical production challenges. The company’s technical team explained how different auxiliary equipment can be configured according to material type, production capacity, process requirements and factory layout.
From single-machine applications to complete auxiliary systems, Wensui showed its ability to support customers with both equipment manufacturing and engineering application experience.
The plastics industry is moving toward higher efficiency, lower energy consumption, intelligent production and circular material use. In this transition, auxiliary equipment is no longer just a secondary part of the production line. It has become a key factor in production stability, product quality and overall factory competitiveness.
Wensui’s appearance at CHINAPLAS 2026 demonstrated the company’s continued focus on innovation, reliability and practical manufacturing needs. From the GZ30HP PEEK special crusher to the WEMD120 energy-saving dehumidifying dryer, the company presented equipment solutions that respond to real challenges in modern plastic processing.
Looking ahead, Wensui will continue to develop smarter, more efficient and more environmentally responsible auxiliary equipment for global plastic manufacturers. Through continuous product improvement and application-driven engineering, Wensui aims to help customers improve productivity, reduce waste and build more sustainable plastic processing operations.
What did Wensui showcase at CHINAPLAS 2026?
Wensui showcased a range of plastic auxiliary equipment, including plastic crushers, dehumidifying dryers, cooling systems, mold temperature controllers and recycling-related solutions for plastic processing plants.
What is the GZ30HP PEEK special crusher used for?
The GZ30HP is designed for crushing PEEK sprues and material blocks. It uses a low-speed, high-torque structure to process high-performance engineering plastic waste into more uniform particles for recycling.
Why is dehumidifying drying important in plastic processing?
Proper drying helps control material moisture before molding or extrusion. This can reduce defects such as bubbles, silver streaks, poor surface quality and unstable product dimensions.
What industries can use Wensui plastic auxiliary equipment?
Wensui equipment can be used in industries such as automotive parts, packaging, electronics, medical products, engineering plastics, injection molding, extrusion and plastic recycling.
How does auxiliary equipment improve plastic manufacturing efficiency?
Auxiliary equipment improves material preparation, drying, temperature control, cooling and recycling. These steps help stabilize production, reduce waste, lower energy consumption and improve final product consistency.
Since 1990, Wensui Intelligent Equipment Inc. specializes in plastic peripheral equipment for more than 35 years.
Plastic crusher, Chiller, Dehumidifier, Hopper dryer, Resin mixer, Vacuum loader, and robotic arm.
Copyright @ Wensui Intelligent Equipment Inc.
Scan WeChat QR Code
Add us on WeChat for quick support.