1. Home
  2. / What Information Is Required When Buying an Injection Molding Robot?

What Information Is Required When Buying an Injection Molding Robot?

Choosing the right injection molding robot involves more than matching it to the tonnage of an injection molding machine. Buyers must also consider product weight, mold dimensions, robot movements, production cycle time, and available installation space.

Providing accurate technical information helps manufacturers select a suitable robot, avoid installation problems, and maintain stable automated production.

What information is required when buying an injection molding robot? The five key factors are injection molding machine specifications, product details, robot configuration, production cycle requirements, and installation conditions.

Wensui injection molding robot

1. Injection Molding Machine Tonnage and Dimensions

The specifications of the injection molding machine are the starting point for robot selection.

Buyers should provide the machine brand, model, clamping force, tie-bar spacing, maximum mold opening stroke, and mold height.

For example, a 160-ton injection molding machine and a 350-ton machine have different dimensions and operating requirements. As a result, the robot’s vertical stroke, traverse stroke, and overall working range must be selected accordingly.

It is also important to confirm whether the injection molding machine supports a compatible robot interface, such as EUROMAP 12 or EUROMAP 67. Proper signal communication allows the robot and molding machine to operate safely in a coordinated production sequence.

2. Product Weight, Dimensions, and Removal Method

Product weight and dimensions directly affect the robot’s required payload capacity and end-of-arm tooling design.

Before purchasing, buyers should specify the maximum product weight, overall dimensions, number of mold cavities, and preferred removal method.

The total robot payload must include the molded product and the complete end-of-arm tooling (EOAT).

For example, if a molded part weighs 2 kg and the gripper assembly weighs 1.5 kg, the combined load is 3.5 kg. Additional capacity should be considered according to the robot’s specifications, load distribution, and operating conditions.

Depending on the product, the robot may use vacuum suction cups, pneumatic grippers, or a combination of gripping methods.

Thin-wall containers, deep-cavity parts, and products with sensitive surfaces may require customized EOAT to ensure reliable removal without damaging the finished parts.

3. Robot Axis Configuration and Required Functions

Injection molding robots are available in different configurations, including three-axis and five-axis servo robots.

A three-axis robot is generally suitable for standard pick-and-place applications, such as removing molded parts and transferring them to a conveyor.

For applications requiring part rotation, complex positioning, or multiple placement orientations, a five-axis robot may be more appropriate.

Before selecting a model, buyers should clarify whether the application requires sprue separation, product stacking, insert loading, conveyor integration, or communication with other automation equipment.

At Wensui, robot selection should be based on the complete production process rather than machine tonnage alone. Identifying the required movements and automation functions early helps reduce the risk of costly modifications after installation.

injection molding robot

4. Production Cycle Time and Robot Operating Speed

Production cycle time is another important consideration when selecting an injection molding robot.

Buyers should provide the current molding cycle, mold opening time, and target part removal time.

For example, consider an injection molding machine operating with a 25-second production cycle for 20 hours per day.

The theoretical output is:

20 × 3,600 ÷ 25 = 2,880 cycles per day.

If the robot increases the overall production cycle by 2 seconds, daily output decreases to approximately 2,667 cycles, representing a reduction of about 213 cycles.

This example shows why robot operating speed and movement coordination matter.

However, maximum speed should not be the only selection criterion. Repeatability, payload stability, safe mold-area entry, and reliable part release are equally important for consistent production.

5. Installation Space and Peripheral Equipment Requirements

Before purchasing an injection molding robot, buyers should also provide information about the factory layout and available installation space.

Important factors include the clearance above the injection molding machine, spacing between machines, required traverse distance, and product discharge position.

For example, if finished products must be transferred to a conveyor beside the machine, the robot must have sufficient horizontal reach and vertical clearance to complete the movement without interfering with surrounding equipment.

Electrical supply, compressed air requirements, safety guarding, and machine communication interfaces should also be confirmed.

If the production line includes conveyors, granulators, or other auxiliary equipment, the overall layout should be considered during the initial robot selection process.

injection molding robot selection

Conclusion

Selecting the right injection molding robot requires five essential categories of information: machine specifications, product dimensions and weight, robot movement requirements, production cycle time, and installation conditions.

Providing these details allows manufacturers and automation suppliers to evaluate robot compatibility and recommend a suitable configuration.

Wensui offers injection molding automation and auxiliary equipment solutions for plastics manufacturers. By reviewing the actual molding process and application requirements, Wensui can help customers evaluate robot selection and equipment integration options.

Planning to purchase an injection molding robot? Contact Wensui with your injection molding machine specifications, product details, and production requirements to discuss a suitable automation solution.

Frequently Asked Questions

Q1: What information is needed to select an injection molding robot?

Buyers should provide the injection molding machine model, clamping force, mold dimensions, product weight, required robot movements, production cycle time, and installation conditions.

Q2: How do I calculate the required payload for an injection molding robot?

The required payload must account for the product weight, gripper weight, and other end-of-arm tooling components. For example, a 2 kg product and a 1.5 kg gripper create a total static load of 3.5 kg. Robot selection should also consider dynamic loads and the manufacturer’s payload specifications.

Q3: Should I choose a three-axis or five-axis injection molding robot?

Three-axis robots are commonly used for straightforward part removal and transfer applications. Five-axis robots may be suitable when additional part rotation, orientation control, or more complex positioning is required.

Q4: Can Wensui help select a suitable injection molding robot?

Wensui can help evaluate injection molding automation requirements based on machine specifications, product characteristics, production cycle targets, and equipment integration needs.

Table of Contents

✆ WhatsApp ✉ Email Us