1. Home
  2. > Bottle Crusher Repair and Maintenance Guide

Bottle Crusher Repair and Maintenance Guide

Bottle Crusher

Mechanical equipment, including bottle crushers, has a finite lifespan, which human factors and environmental conditions can significantly influence. Proper and timely maintenance is crucial to ensure the longevity and efficiency of bottle crusher machine. Despite the variety of bottle crusher machine available on the market, they share common operational principles and similar types of malfunctions. This guide outlines the common issues that can arise with bottle crushing machine and provides solutions to address them effectively.

bottle crusher machine

Common بottle سیrushing برنجachine Faults and Their Solutions

  • High Temperature of the Main Bearing

Possible Cause: Insufficient grease.

Solution: Add the appropriate amount of grease.

Possible Cause: Contaminated grease.

Solution: Clean the bearing and replace the grease.

Possible Cause: Damaged bearing.

Solution: Replace the bearing.

  • Excessive Discharge Size

Possible Cause: Worn crushing teeth

Solution: Replace the crushing teeth or perform surfacing welding.

Possible Cause: Worn or fallen side teeth.

Solution: Replace the side teeth.

  • Increased Vibration

Possible Cause: Damaged bearing

Solution: Replace the bearing.

Possible Cause: Damaged gear coupling.

Solution: Replace the gear coupling.

  • Reduced Processing Capacity or Insufficient Power

Possible Cause: Hydraulic coupling leakage

Solution: Add No. 22 turbine oil or No. 6 hydraulic transmission oil.

Possible Cause: Broken coupling.

Solution: Replace the coupling.

Possible Cause: Uneven feeding.

Solution: Adjust the feeding.

  • Failure to Automatically Reverse

Possible Cause: Incorrectly installed or damaged sensor.

Solution: Adjust or replace the sensor.

Possible Cause: Loose sensor lead or wiring.

Solution: Connect the lead or tighten the wiring.

  • Sensor Protection System Failure

Possible Cause: Damaged proximity switch or loose wiring in the electric control cabinet.

Solution: Replace the switch or reconnect the wires according to the wiring diagram.

bottle crushing machine

Tips for crusher machine Maintenance

To ensure your crusher machine for plastic remains in optimal working condition, reduce the occurrence of failures, and extend its service life, follow these maintenance tips:

  1. Regular Lubrication: Ensure all moving parts are properly lubricated to minimize friction and wear.
  2. Bearing Maintenance: Frequently check and maintain the bearings to prevent overheating and damage.
  3. Preventive Maintenance: Regularly inspect the crusher for any signs of wear or potential issues and address them promptly.
  4. Proper Feeding: Ensure thecrushing machineis fed evenly to avoid strain and inefficiency.
crusher machine for plastic

By following these guidelines and performing routine maintenance, you can keep your hard plastic crusher operating efficiently and effectively, minimizing downtime and prolonging its operational