WSDB Standard Hopper Dryer For Injection Molding Machine

  1. Home
  2. >

Details

WSDB Standard Hopper Dryer For Injection Molding Machine

The parts that come in contact with the materials are made of stainless-steel.

Precise cast aluminum housing features a smooth surface and heat preservation.

Adopted a low noise blower and an optional air filter to ensure material purity.

Proportional deviation display thermostat controls the temperature accurately.

Material tank is installed with a glass window for inspection.

Curved heating cylinder is designed to avoid powder jam and overheat.

Hopper is designed for easy opening and compatible for all robots.

Hopper Dryer
Hopper Dryer
WSDB Standard Hopper Dryer
WSDB Standard Hopper Dryer
Model Capacity

(kg)

Heating

(kW)

Blower

(W)

Power

(V)

Dimension

L×W×H(cm)

Base Size

(cm)

Net Weight

(kg)

WSDB-12 12 1.6 75 380/3Ф 64×44×76 11×11×Ф4 22
WSDB-25 25 3.5 135 380/3Ф 76×50×104 15×15×Ф6.2 34
WSDB-50 50 4.5 155 380/3Ф 87×54×121 16×16×Ф7 45
WSDB-75 75 6.5 210 380/3Ф 94×60×131 16×16×Ф7 56
WSDB-100 100 6.5 210 380/3Ф 101×70×141 18×18×Ф8 68
WSDB-150 150 9 320 380/3Ф 110×74×170 20×20×Ф8.8 78
WSDB-200 200 12 320 380/3Ф 118×84×176 23×23×Ф11.5 110
WSDB-300 300 15 340 380/3Ф 142×100×183 27.5×27.5×Ф12 152
WSDB-400 400 15 340 380/3Ф 148×106×202 27.5×27.5×Ф12 170
WSDB-600 600 20 1030 380/3Ф 158×116×240 28×28×Ф13.5 280
WSDB-800 800 30 1100 380/3Ф 177×118×254 28×28×Ф13.5 380

Note: The capacity of hopper is based on PA-6 granula.

Power supply: 3Φ 380VAC 50Hz

We reserve the right to change specifications without prior notice.

en_USEnglish