VMD Industrial 3-in-1 Dehumidifying Dryer For Mould
Integrated dehumidifying, drying and feeding into one unit.
Standard configuration is 1 to 2 feeding: 1 reed switch hopper and 1 photoelectric hopper
Optional configuration is 1 to 3 feeding: 1 reed switch hopper and 2 photoelectric hoppers
Up to 1 to 4 feeding: 1 reed switch hopper and 3 photoelectric hoppers
Controlled by microprocessor with P.I.D. temperature control.
Consists of LCD display and keyboard.
Double-condenser provides lower return air temperature and dew point below -40°C (-50°C is realizable with chilling water).
Easy to operate system and to understand warning messages.
Insulating drying hopper with European standard allows better heat preservation and drying efficiency.
Fully sealed feeding system to prevent dried material from contacting open air and being re-damped.
Discharge valve ensures no residual materials in hopper tubes.
Small footprint and high movability.
PLC control with enhanced configuration is optional for feeding up to 5 molding machines.
Can be paired with a dew-point monitor.
| Model | VMD-45L
/50A |
VMD-90L
/80A |
VMD-120L
/80A |
VMD-160L
/130A |
VMD-230L
/160A |
VMD-300L
/220A |
VMD-450L
/300A |
VMD-750L
/400A |
VMD-900L
/500A |
VMD-1200L
/80A |
||
| Hopper | Capacity(L) | 45 | 90 | 120 | 160 | 230 | 300 | 450 | 750 | 900 | 1200 | |
| Insulating
Materials |
Fiberglass and Casing | |||||||||||
| Dry Air Dew Point | -40°C | |||||||||||
| Drying Temp. | 80-160°C | |||||||||||
| Air Flow(m3/h) | 50 | 80 | 80 | 130 | 160 | 220 | 300 | 400 | 500 | 800 | ||
| Blower Power(kW) | 0.55 | 0.75 | 0.75 | 1.1 | 1.5 | 2.2 | 3 | 5.5 | 5.5 | 7.6 | ||
| Regeneration Blower
(kW) |
0.25 | 0.25 | 0.25 | 0.25 | 0.55 | 0.55 | 0.75 | 0.75 | 2.2 | 2.2 | ||
| Drying Heater(kW) | 3.9 | 5.4 | 5.4 | 5.4 | 7.2 | 12 | 15 | 18 | 21 | 21 | ||
| Regeneration Heater
(kW) |
3.9 | 3.9 | 3.9 | 3.9 | 5.4 | 5.4 | 7.2 | 7.2 | 11 | 14 | ||
| Pipe
Diameter |
Drying
(mm) |
38 | 51 | 51 | 51 | 63 | 63 | 76 | 76 | 100 | 100 | |
| Cooling
(inch) |
3/4〞 | |||||||||||
| Regeneration(mm) | 38 | 38 | 38 | 38 | 51 | 51 | 51 | 51 | 63 | 63 | ||
| Conveying Blower(kW) | 0.75 | 1.1 | 1.1 | 1.1 | 1.5 | 1.5 | 1.5 | 2.2 | 3.7 | 3.7 | ||
| Conveying
Distance (m) |
Stage 1 | 10 | ||||||||||
| Stage 2 | 10 | |||||||||||
| Hose Diam.(inch) | 1.5 | 2 | 2 | |||||||||
| Sensor Hopper
Capacity(L) |
6 | 6 | 6 | 6 | 6 | 6 | 6 | 10 | 10 | 10 | ||
| Vacuum Hopper
Capacity(L) |
6 | 6 | 6 | 6 | 6 | 6 | 6 | 10 | 10 | 10 | ||
| Dimension
L×W×H(cm) |
110×93× 160 |
113×93× 232 |
113×93×240 | 113× 93×270 |
137× 99×275 |
137× 99×275 |
150× 130×285 |
178× 130×292 |
214× 138×322 |
225× 138×355 |
||
| Net Weight(kg) | 280 | 310 | 340 | 360 | 420 | 550 | 600 | 750 | 830 | 900 | ||
Note: the minimum air pressure is 0.4MPa and the minimum air flow is 15L/hr.
Power supply: 3Φ 380VAC 50Hz
We reserve the right to change specifications without prior notice.
Since 1990, Wensui Intelligent Equipment Inc. specializes in plastic peripheral equipment for more than 35 years.
Plastic crusher, Chiller, Dehumidifier, Hopper dryer, Resin mixer, Vacuum loader, and robotic arm.
Copyright @ Wensui Intelligent Equipment Inc.
Scan WeChat QR Code
Add us on WeChat for quick support.